Rogue 2WD L4-2.5L (QR25DE) (2008)
![background image](/nissan/rogue_2wd/l4-2.5l_(qr25de)/Page-1814001.png)
Trunk / Liftgate Hinge: Service and Repair
With Intelligent Key System
BACK DOOR HINGE
BACK DOOR HINGE : Exploded View
Exploded View DLK-285
BACK DOOR HINGE : Removal and Installation
REMOVAL
1. Remove back door assembly.
2. Remove back door weather-strip.
3. Remove luggage side lower finisher and luggage side upper finisher.
4. Using remover tool, remove headlining clip at the rear side of headlining.
5. Remove rear side of headlining.
6. Remove back door hinge mounting nuts (body side), and then remove back door hinge.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
Check back door open/close operation after installation.