Rogue 2WD L4-2.5L (QR25DE) (2008)
2. Disengage front pillar garnish (1) mounting pawl and clip using remover tool (A).
3. Pull the front pillar garnish (1) partially toward the vehicle.
4. Insert the remover tool (B) between mounting clip bottom side and body side to disengage front pillar garnish (1) mounting clip.
5. Once free, pull front pillar garnish (1) upwards to disengage the lower locating tab from instrument panel.
6. Remove front pillar garnish (1).
FRONT KICKING PLATE INNER
1. Disengage the pawls with remover tool (A) from the body.
2. Remove front kicking plate inner (1).
FRONT KICKING PLATE OUTER
1. Disengage the pawls from the body with remover tool (A).
2. Remove front kicking plate outer (1)
DASH SIDE FINISHER
1. Remove front kicking plate inner.