Rogue 2WD L4-2.5L (QR25DE) (2008)
4. Remove retaining ring (1) from cylinder body using suitable tool.
5. Place a wooden block as shown in the figure, and blow air from union bolt mounting hole to remove piston and piston boot.
CAUTION: Never get fingers caught in the piston.
6. Remove piston seal from cylinder body using suitable tool.
CAUTION: Be careful not to damage a cylinder inner wall.
ASSEMBLY
1. Apply polyglycol ether based lubricant to piston seal (1), and install to cylinder body.
CAUTION: Never reuse piston seal.