Rogue 2WD L4-2.5L (QR25DE) (2008)
Parking Brake Control: Service and Repair
Removal and Installation
PB-6 Exploded View
REMOVAL
1. Remove rear tires with power tool.
2. Remove instrument driver lower cover.
3. Disconnect parking brake switch harness connector.
4. Remove adjusting nut and loosen front cable.
5. Remove device assembly.
6. Remove center console.
7. Remove the exhaust center tube and muffler assembly.
8. Separate front cable from rear cable, and remove front cable.
9. Remove parking brake shoe, and remove rear cable from toggle lever.
10. Remove rear cable mounting bolts pull out rear cable from vehicle.
INSTALLATION
Installation is the reverse order of the removal.