Rogue 2WD L4-2.5L (QR25DE) (2008)
Radiator: Removal and Replacement
Removal and Installation
CO-15 Exploded View
REMOVAL
WARNING:
^
Never remove radiator cap when engine is hot. Serious burns may occur from high-pressure engine coolant escaping from radiator.
^
Wrap a thick cloth around the radiator cap. Slowly turn it a quarter of a turn to release built-up pressure. Then turn it all the way.
1. Remove engine under cover.
2. Drain engine coolant from radiator.
CAUTION: Perform this step when the engine is cold.
3. Remove air duct (inlet).
4. Remove radiator hose (upper) and reservoir tank hose.
5. Disconnect harness connector from fan motor, and move it aside.