Rogue 2WD L4-2.5L (QR25DE) (2008)
Air Bag(s) Arming and Disarming: Service and Repair
CAUTION:
-
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables, then wait at least 3 minutes.
-
Do not attempt to repair or replace damaged direct-connect SRS component connectors. If a driver air bag direct-connect harness connector is
damaged, the spiral cable must be replaced.
-
Do not insert any foreign objects (screwdriver, etc.) into air bag module or harness connectors.
-
After the work is completed, perform self-diagnosis to check that no malfunction is detected.