Rogue 2WD L4-2.5L (QR25DE) (2008)
Center Mounted Brake Lamp: Service and Repair
Xenon Type
HIGH-MOUNTED STOP LAMP
Exploded View
Exploded View EXL-129
Removal and Installation
CAUTION: Disconnect battery negative terminal or remove the fuse.
REMOVAL
1. Remove the back door trim finisher upper.
2. Remove the mounting nuts and clips.
3. Cut the seal packing by the thin plate (A).
1. Back door panel
2. High-mounted stop lamp
4. Pull the high-mounted stop lamp toward rear of the vehicle.
Remove the high-mounted stop lamp.
5. Disconnect the high-mounted stop lamp connector.
INSTALLATION
Install in the reverse order of removal.
CAUTION: Seal packing cannot be reused.