Rogue 2WD L4-2.5L (QR25DE) (2008)
2. Remove mounting bolt (A), and then disconnect high-pressure flexible hose (1) from condenser.
CAUTION: Cap or wrap the joint of the A/C piping and condenser with suitable material such as vinyl tape to avoid the entry of air.
3. Remove mounting bolt (A), and then remove high-pressure flexible hose (1) from compressor (2).
CAUTION: Cap or wrap the joint of the A/C piping and compressor with suitable material such as vinyl tape to avoid the entry of air.
INSTALLATION
Installation is basically the reverse order of removal.
CAUTION:
-
Replace O-rings with new ones. Then apply compressor oil to them when installing.
-
Check for leakages when recharging refrigerant.