Rogue 2WD L4-2.5L (QR25DE) (2008)
HARNESS CONNECTOR (LEVER LOCKING TYPE)
-
Lever locking type harness connectors are used on certain control units and control modules such as ECM, ABS actuator and electric unit (control
unit), etc.
-
Lever locking type harness connectors are also used on super multiple junction (SMJ) connectors.
-
Always confirm the lever is fully locked in place by moving the lever as far as it will go to ensure full connection.
CAUTION: Always confirm the lever is fully released (loosened) before attempting to disconnect or connect these connectors to avoid damage
to the connector housing or terminals.