Rogue 2WD L4-2.5L (QR25DE) (2008)
18. Select Next
19. During data transfer, the screen in Figure 5 is displayed.
CAUTION:
During data transfer:
^ DO NOT disturb the VI, DDL, or USB connections.
^ DO NOT try to start the engine or turn the ignition OFF.
^ The engine fans may be running. This is normal.
NOTE:
^ If "Transfer To VI" reaches 100%, and "Transfer To ECU" does not start, or
^ The error in Figure 6 displays.
a. Check / make sure the battery voltage is above 12 V and all vehicle electrical loads are turned OFF (except the engine cooling fans).
b. Select Cancel Data Transmission, then click on the "Home" icon (upper left corner of C-III screen) and try recover again (go back to Step 6).