Rogue 2WD L4-2.5L (QR25DE) (2008)
CAUTION
2. When you get to the ECM Reprogramming screen shown in Figure 1, confirm this bulletin applies as follows:
A. On your C-III screen, look at the Part Number column (see Figure 1 example):
^ If this column is blank (no part number listed), this bulletin does not apply. Close C-III and refer to ASIST for further diagnostic information.
^ If a Part Number is listed, write it on the Repair Order.
B. Compare the Part Number you wrote down to the number in the Current ECM Part Number in Table A above.
^ If there is a match, this bulletin applies. Continue with the reprogramming procedure.