Rogue 2WD L4-2.5L (QR25DE) (2008)
The C-III computer automatically gets applicable TCM reprogramming data during ASIST synchronization.
^ TCM initialization is not needed for this campaign reprogramming.
1. Make sure to check for DTCs in all systems. Repair and clear as needed.
^ This bulletin does not cover repairs for DTCs.
2. Navigate C-III to the reprogramming screen shown in Figure 1 above.
NOTE:
^ Do not use the "Reprogramming / Programming" selection.
^ Select the Model and Model Year, and then navigate to Direct Diagnosis > Reprogramming.
^ TCM initialization is not needed for this campaign reprogramming.
3. On your C-III screen, look for a Transmission Part Number in the Part Number column (see Figure 1 example).
^ If there is no Transmission Part Number listed, this bulletin does not apply.
^ If a Transmission Part Number is listed, write it on the Repair Order and then go to Step 4.