Rogue 2WD L4-2.5L (QR25DE) (2008)
![background image](/nissan/rogue_2wd/l4-2.5l_(qr25de)/Page-1668001.png)
Impact Sensor: Service and Repair
For Mexico
Crash Zone Sensor
CRASH ZONE SENSOR
Exploded View
Exploded View SR-33
Removal and Installation
WARNING:
-
Before servicing, turn ignition switch OFF, disconnect both battery terminals and wait at least 3 minutes.
-
Do not use air tools or electric tools for servicing.
REMOVAL
1. Remove the front bumper upper clips.
2. Remove the crash zone sensor fixing nuts.
3. Disconnect crash zone sensor harness connector, and then remove crash zone sensor.
CAUTION:
-
Replace the crash zone sensor if it has been dropped or sustained an impact.
-
Do not use old fixing nuts after removal; replace with new nuts.
-
Replace the crash zone sensor of deployed SRS driver air bag and deployed SRS front passenger air bag.
INSTALLATION