Rogue 2WD L4-2.5L (QR25DE) (2008)
4. Compare the P/N you wrote down to the numbers in the Current TCM P/N column in Table A above.
^ If there is a match this bulletin applies. Continue with the reprogramming procedure.
^ If there is not a match, this campaign does not apply or it has already been done. Close C-III and check Service Comm to confirm campaign eligibility.
5. If this bulletin applies and you have performed TCM reprogramming; when reprogramming is complete, the screen in Figure 2 displays.
6. Erase DTCs in all systems.
^ During TCM reprogramming, DTCs will set in several systems and must be erased before ECM reprogramming.
7. Go to ECM Reprogramming below.
ECM Reprogramming
^ Make sure TCM reprogramming was done first.
^ Make sure to erase DTCs from all systems.