Rogue 2WD L4-2.5L (QR25DE) (2008)
Valve Body: Customer Interest
A/T - MIL ON/DTCs P0840/P0845/P0744/P1777
Classification: AT09-013A
Reference: NTB09-148A
Date: May 26, 2010
ALTIMA, ROGUE, SENTRA; MIL "ON" W/DTC P0840 / P0845 / P0744 / P1777
This bulletin has been amended. The ACTIONS information has been revised. No other changes have been made. Please discard all previous copies.
APPLIED VEHICLES:
2007-2008 Altima, Rogue, and Sentra (L32/S35/B16)
APPLIED ENGINE: QR25DE OR MR20DE ONLY
APPLIED TRANSMISSION: RE0F10A CVT ONLY
IF YOU CONFIRM
Any of the following DTCs are stored in the TCM:
^ P0840
^ P0845
^ P0744
^ P1777
ACTIONS
^ Replace the Control Valve Assembly with the part listed in the Parts Information section of this bulletin. Reference SECTION TM, CONTROL
VALVE Removal and Inspection in the 2008 or 2009 Rogue Electronic Service Manual (ESM) for directions to be used for all Applied Vehicles.
^ Erase the EEP ROM calibration data in the TCM and allow it to recalibrate. Reference NTB08-064; CVT AND 5 SPEED A/T INITIALIZATION
INFORMATION for directions.
PRECAUTIONS WHEN REPLACING CVT CONTROL VALVE ASSEMBLY
Transmissions are vulnerable to particles (dust, metal, lint, etc.).
^ When replacing a CVT Control Valve Assy., make sure your work environment (shop, workbench, etc.), the transmission area (sub-frame, oil pan,
harness connector, etc.), and your hands are free of contamination.
^ Make sure all parts are clean prior to installing on the vehicle.
^ Only unpack Service Parts just before installation.