Rogue 2WD 2008 Transmission Control Systems - TSB 09-044
Some Rogue models have two coolers. Make sure to clean both, if applicable.
G. Remove and discard the existing CVT oil level gauge (dipstick).
^ Replace it with the dipstick P/N listed in the PARTS INFORMATION section of this bulletin.
^ Fill / adjust the fluid level as necessary.
H. Reprogram the radio presets.
I. Reset / initialize all applied systems i.e., power windows, clock, sunroof, etc.
^ Refer to the ESM as needed.
J. Test drive the vehicle and make sure it operates correctly.