Rogue 2WD L4-2.5L (QR25DE) (2008)
Windshield Washer Reservoir: Service and Repair
ON-VEHICLE REPAIR
WASHER TANK
Exploded View
Exploded View WW-82
Removal and Installation
REMOVAL
1. Remove the clip (A).
2. Pull out the washer tank inlet (1) from the washer tank.
3. Remove the fender protector RH.
4. Disconnect washer pump connector.
5. Disconnect washer level switch connector. (for Canada models)
6. Remove front washer tube and rear washer tube.
7. Remove washer tank mounting nuts and bolt.
8. Remove the washer tank from the vehicle.
INSTALLATION
Install in the reverse order of removal.
CAUTION: Add water up to the top of the washer tank inlet after installing. Check that there is no leakage.