Sentra L4-2.0L (MR20DE) (2010)
Evaporator Core: Service and Repair
REFRIGERANT LINES
Removal and Installation for Evaporator
REMOVAL
1. Remove the expansion valve. See: Expansion Valve/Service and Repair.
2. Remove the instrument lower cover RH. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Component Parts.
3. Remove the glove box. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal And
Installation.
4. Remove the evaporator cover (1).
5. Remove the evaporator (2).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
-
Replace the O-rings with new ones, then apply compressor oil to them when installing them.