Sentra L4-2.0L (MR20DE) (2010)
3. After connecting, make sure that the connection is secure using the following procedure.
-
Visually confirm that the two retainer tabs are secured to the connector.
-
Pull the tube and the connector to make sure they are securely connected.
Inspection Hole Cover
1. Before installing inspection hole cover, confirm that there are no fuel leaks. See: Powertrain Management/Fuel Delivery and Air Induction/Fuel
Tank/Service and Repair/Removal and Installation.
2. Install inspection hole cover with the front mark (arrow) facing front of vehicle.
3. Lock clips (A) by turning counterclockwise.
INSPECTION AFTER INSTALLATION
Use the following procedure to check for fuel leaks.
1. Turn ignition switch "ON" (without starting the engine), to check the connections for fuel leaks with the electric fuel pump applying pressure to
the fuel piping.
2. Start the engine and let it idle to check that there are no fuel leaks at the fuel system connections.