Sentra L4-2.0L (MR20DE) (2010)
Seals and Gaskets: Service and Repair
Differential Side Oil Seal
ON-VEHICLE SERVICE
Differential Side Oil Seal
COMPONENTS
REMOVAL
1. Remove front drive shaft from CVT assembly. See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Testing and Inspection See: Drive
Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Removal and Replacement/Removal and Installation (Left Side).
2. Remove differential side oil seal using suitable tool.
CAUTION:
Do not scratch CVT case or converter housing.
INSTALLATION
1. Drive the new differential side oil seal in until it is flush using Tool.
Tool number : KV38100300 ( - )
CAUTION:
-
Do not reuse differential side oil seals.
-
Apply CVT fluid to the new differential side oil seals.
2. Install drive shaft assembly. See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Testing and Inspection See: Drive Axles, Bearings and
Joints/Axle Shaft Assembly/Service and Repair/Removal and Replacement/Removal and Installation (Left Side).
3. Check for CVT fluid leakage and CVT fluid level. See: Service and Repair/Procedures/Checking CVT Fluid.