Sentra GXE L4-1.8L (QG18DE) (2000)
^
ECM Reprogramming is not necessary - this bulletin does not apply. Refer to the appropriate ESM for further diagnostic and repair information.
ECM REPROGRAMMING
Vehicle ECM Reprogramming Overview
There are six basic steps:
1. Download reprogramming data (transfer it) from ASIST into CONSULT-II.
2. "Preparation" steps before reprogramming.
3. Reprogram the vehicle ECM.
4. Erase any DTC's that stored during reprogramming.
5. Check for DTC P1138 reset.
6. "Wrap-up".
Step One: Download (Transfer) Data From ASIST Into CONSULT-II
1. Select vehicle model and model year (Example: Maxima, 2004).
2. Select the correct reprogramming data:
a. Locate the specific "Model Configuration" (Example: VQ35 5A/T ASCD TCS).
NOTE:
Model Configuration may include items such as engine type, transmission type, and vehicle options such as ASCD, TCS, ABS etc.
b Select (click on) the "To" number. (Write the "To" number on the repair order.)
NOTE:
The "To" number will read: 23710-XXXXX.
3. Click on the "Add" button.