nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Campaign - Instrument Voltage Regulator|Page 6458 > < Campaign - Instrument Voltage Regulator
Page 2
background image

FIGURE 1

2.

The dealer must install the underhood label (Figure 1) next to the existing Emission Control Information label when the voltage regulator has been
replaced. A supply of labels will be sent to you under separate cover. If required, additional labels can be ordered from your Regional Office.

PARTS INFORMATION

Dealers should order parts through the normal parts distribution system in anticipation of their local demand.

PART NAME

PART NUMBER

Regulator Assembly

24866-51S05

SERVICE PROCEDURE

Replace the existing instrument voltage regulator with the revised part using normal replacement procedures.
WARRANTY INFORMATION

A service campaign claim may be entered via DATANET. A peel-off label, imprinted with the owner's name, address, vehicle identification number,
campaign description and PNC is included in the owner's notification package. Remove this label and apply it directly to the repair order to save the
service writer's time and ensure accurate, readable information for claim submission. Dealers who are not yet on DATANET should submit a standard
S-I-S warranty claim.

WARRANTY CLAIM INFORMATION

Enter the DATANET claim or type the S-I-S claim, using the following information:

CS PNC

CT

OP CODE

FLAT RATE

OPERATION

9Y P7136

99

P71360

0.5 hr.

Replace Instrument

Voltage Regulator

Owner Letter

Dear Nissan Sentra Owner:

Our records show that you are the owner of a 1987 Nissan Sentra, and we thank you for choosing Nissan when you were selecting your new car. Nissan

Campaign - Instrument Voltage Regulator|Page 6458 > < Campaign - Instrument Voltage Regulator