Sentra SE L4-1998cc 2.0L DOHC MFI (SR20DE) (1998)
Exploded Views
THE LARGE ILLUSTRATIONS are exploded views (See Image) and contain tightening torques, lubrication points and other information necessary to
perform repairs.
The illustrations should be used in reference to service matters only. When ordering parts, refer to the appropriate PARTS CATALOG.
THE SMALL ILLUSTRATIONS show the important steps such as inspection, use of special tools, knacks of work and hidden or tricky steps which are
not shown in the previous large illustrations. Assembly, inspection and adjustment procedures for complicated units such as the automatic transaxle or
transmission, etc. are presented in a step-by-step format where necessary.
Symbols And Abbreviations
^
The UNITS given in this manual are primarily expressed as SI UNITS (International System of Unit), and alternately expressed in the metric
system and in the yard/pound system.
"Example"
Tightening torque:
59-78 N.m (6.0-8.0 kg-m, 43-58 ft-lb)
^
The captions WARNING and CAUTION warn you of steps that must be followed to prevent personal injury and/or damage to some part of the
vehicle.
^
WARNING indicates the possibility of personal injury if instructions are not followed.
^
CAUTION indicates the possibility of component damage if instructions are not followed.
^
BOLD TYPED STATEMENTS except WARNING and CAUTION give you helpful information.
Wire Color Code Identification
B:
Black
BR:
Brown
CH:
Dark Brown
DG:
Dark Green
G:
Green
GY:
Grey
L:
Blue
LG:
Light Green
OR:
Orange
P:
Pink
PU:
Purple
R:
Red
SB:
Sky Blue
W:
White
Y:
Yellow
When the wire color is striped, the base color is given first, followed by the stripe color as shown below:
Example: L/W = Blue with White stripe.