Sentra Sedan L4-1597cc 1.6L SOHC (E16S) (1986)
Brake Shoe: Service and Repair
Fig. 18 Exploded view of drum brakes. 1985-88 Pulsar & Sentra
1.
Raise and support vehicle and remove wheel and tire assemblies.
2.
Release parking brake.
3.
Remove dust cap, then remove and discard cotter pin.
4.
Take out adjusting cap and wheel bearing nut.
5.
Remove brake drum with outer bearing and washer.
6.
Remove parking brake rear cable.
7.
Remove anti-rattle spring and pin, Fig. 18.
8.
Remove retainer, then the return springs and brake shoes.
9.
Separate equalizer and rear cable.
10.
Remove adjuster assembly.
11.
Remove toggle lever spring and clip, then separate toggle lever and shoe.
12.
Apply suitable lubricant to lubricating points, Fig. 18.
13.
Reverse procedure to install.
14.
Adjust brakes by apply parking brake several times.
15.
Adjust parking brake.