Sentra Sedan L4-1597cc 1.6L SOHC (E16S) (1986)
/Page-309002.png)
FIGURE 1
FIGURE 2
2.
Install the new heat shields and mounting hardware as shown in Figure 1. Tighten the 3 clamp screws and 6 nuts to 5.8 to 7.2 ft.lbs. (0.8 to 1.0
kg-m).
CAUTION: When tightening the clamps, make sure the heat shield flanges do not contact each other as shown in Figure 2.
