Sentra Sedan L4-1597cc 1.6L SOHC (E16S) (1986)
Seat Belt Extension: Technical Service Bulletins
Seat Belts - Extender Availability
Body & Frame
July 27, 1987
FRONT SEAT BELT EXTENDERS, LONGER FRONT SEAT BELTS
This Technical Bulletin contains a complete list of seat belt extenders and longer seat belt sets currently available for use on all Nissan Models except
1987 Maxima vehicles with automatic seat belts. These assemblies should be used when body size or driving position do not allow for proper fit of the
factory installed lap-shoulder belts. Use the information in this bulletin in place of that found in previously issued Technical Bulletin BF86-012
(TS86-082). Make note of this on page BF-30 of the 1986 Technical Bulletin Reprint Manual.
When a customer requests information regarding better fitting seat belts:
Inspect the original lap-shoulder belt assembly to ensure proper function. Refer to Section MA of the appropriate model Service Manual.
Inform the customer that the extenders/longer seat belts are designed for his/her specific use only. Individuals who can use the standard seat
belt may not receive full restraint system protection when using an extender/longer belt.
If a longer belt is installed, return the old belt to the customer for use if and when the extended length belt is no longer required.
Listed below are the revised part numbers for the extenders and longer seat belts with the applied models. These belts should be provided to the customer
free of charge, and should be ordered through the Parts Department system. They are available only in black.
*1974-78 B210 (NSK Warner) 1975-78 280ZX
1979-81 210 (2-Door) 1979-81 280ZX
1982 210 (2-Door)
1986-87 Stanza Wagon
*1974-76 B210 (Takata)
*1977-78 B210 (Takata) 1979 Truck
1979-82 210 (4-Door)
1982.5-86 Sentra (4-Door) 1987 Pathfinder
1983-86 Pulsar (4-Door) **1983-87 Truck 1982-86 200SX (Applied date: prior to 2/86)