nissan Workshop Repair Guides

Nissan and Datsun Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Ignition Switch: Service and Repair

Fig. 2 Ignition switch replacement

1.

Remove the four upper and lower shell cover retaining screws, then the shell covers.

2.

Disconnect electrical connectors from switch.

3.

Remove switch retaining screw from steering lock, Fig. 2.

4.

Remove switch.

5.

Reverse procedure to install.

Starting and Charging > Sensors and Switches - Starting and Charging > Ignition Switch > Component Information > Service and Repair

< PREV PAGE NEXT PAGE >