nissan Workshop Repair Guides

Nissan and Datsun Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Continuously Variable Transmission/Transaxle: Technical Service Bulletins
Engine/Transmission - Precautions During R&R Procedure

Classification:
EM03-001a

Reference:
NTB03-093a

Date:
March 19, 2004

CAUTION DURING ENGINE OR TRANSMISSION REPLACEMENT

This bulletin amends NTB03-093. This version amends the Service Information. Please discard all paper copies of the earlier version.

APPLIED VEHICLES: 
All Nissan

SERVICE INFORMATION

Improper or incorrect service and repair procedures may cause damage to new or repaired parts and components.

^

Damage to repaired or replaced engine, transmission, or other components caused by improper procedures during repair or replacement is not
covered by warranty.

This TSB contains information to help you avoid damaging these parts and components.

Cylinder Block - Transmission Dowel Pins

1.

Alignment dowels are installed between the cylinder block and transmission.

^

They ensure accurate alignment of the crankshaft to the transmission input shaft.

2.

If you replace an engine or transmission you must make sure the dowels are installed correctly during re-assembly.

^

Improper alignment caused by missing dowels may cause vibration, oil leaks or breakage of drive-train components.

Transmission and Drivetrain > Continuously Variable Transmission/Transaxle, CVT > Component Information > Technical Service Bulletins > Engine/Transmission - Precautions During R&R Procedure

< PREV PAGE NEXT PAGE >