nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Brakes - ABS Self Check Noise Explanation|Page 3799 > < Four Wheel Drive Selector Switch|Locations
Page 1
background image

Antilock Brakes / Traction Control Systems: Technical Service Bulletins
Brakes - ABS Self Check Noise Explanation

Classification: BR10-004

Reference: NTB10-077

Date: June 10, 2010

ABS SELF CHECK NOISE

APPLIED VEHICLES: All Nissan Vehicles with ABS or ABS/VDC

SERVICE INFORMATION

If you identify:

^ Clicking, knocking, clunking, buzzing, or thumping noise coming from the engine compartment area; and

^ The noise occurs only once during the first few seconds of driving at approximately 16 MPH; and

^ The noise occurs only once per ignition cycle (ignition OFF > ON) and does not occur again until the ignition is cycled.

NOTE:

The noise may be louder after the vehicle has not been operated for a prolonged period of time.

The above condition is normal and does not need repair.

Each time the ignition is turned on and the vehicle is driven at about 16 mph, the ABS/VDC system performs a "Self-Check" to confirm components of
the ABS/VDC system are operating correctly.

This "Self-Check" function creates the noise described above.

If the brakes are being applied when the "Self-Check" occurs, a vibration may be felt in the brake pedal and an increased level of noise may be noticed.

NOTE:

^ Refer customers to the Owners Manual, Section 5, Starting and driving, Brake system on the Anti-Lock Braking System (ABS). The "Self-test feature"

section provides additional explanation.

^ The speeds described above refer specifically to Versa, Sentra, Altima, and Maxima. However, any vehicle fitted with ABS or ABS/VDC will have a

"Self-Check" which is triggered in similar circumstances.

Brakes - ABS Self Check Noise Explanation|Page 3799 > < Four Wheel Drive Selector Switch|Locations