Stanza L4-2389cc 2.4L SOHC MFI (KA24E) (1991)
Then, tighten nuts 60 to 65 degrees clockwise with an angle wrench, or if an angle wrench is not available, tighten them to: 38 to 44 N-m (28
to 33 ft.lb.)
Then, tighten nuts 60 to 65 degrees clockwise with an angle wrench, or if an angle wrench is not available, tighten them to: 38 to 44 N-m (28
to 33 ft.lb.)