Titan 2WD V8-5.6L (VK56) (2004)
1. Remove the door finisher.
^ Refer to section El in the ESM for removal information.
2. Remove the door glass.
^ Refer to section GW in the ESM for removal information.
NOTE:
For front doors, you will also need to remove the glass run rubber at the rear of the window.
^ Refer to section GW in the ESM for run rubber illustration.
Replace the Door Lock Assembly and Outside Handle Bracket
3. Remove the old door lock assembly and outside handle bracket.
^ Refer to section BL in the ESM.
4. Install the new parts specified in the Parts Information table.