Titan 2WD V8-5.6L (VK56) (2004)
![background image](/nissan/titan_2wd/v8-5.6l_(vk56)/Page-1522001.png)
Vacuum Brake Booster: Service and Repair
Vacuum Lines
VACUUM LINES
Removal and Installation
1. Disconnect vacuum hose from hose clip.
2. Release clamps and disconnect vacuum hose.
3. Remove check valve from brake booster
4. Installation is in the reverse order of removal.
CAUTION:
^
Insert vacuum hose for at least 24 mm (0.94 inch).
^
Do not use lubricating oil during assembly.