Titan 2WD V8-5.6L (VK56) (2004)
8. Remove access cover
9. Loosen the crankshaft pulley bolts using Tool to secure the crankshaft.
Tool number: ( - ) J47245
a. Remove the crankshaft pulley from the crankshaft using suitable tool.
-
Set the bolts in the two bolt holes [M6 x 1.0 mm (0.04 in)] on the front surface.
NOTE:
The dimension between the centers of the two bolt holes is 61 mm (2.40 in).
10. Remove the front cover.
a. Loosen and remove the bolts in the reverse of order as shown.
b. Cut the liquid gasket and remove the covers using Tool.
Tool number: KVIOIIIIOO (J-37228)
CAUTION:
Do not damage mating surfaces.
11. Remove the front oil seal using suitable tool.
CAUTION:
Do not damage front cover.