Titan 2WD V8-5.6L (VK56) (2004)
![background image](/nissan/titan_2wd/v8-5.6l_(vk56)/Page-2300004.png)
e. Unplug the white 3-wire connector at the top of the fuel pump.
^
Do NOT disturb the black 2-wire connector.
f. Carefully cut the tie-wrap securing the harnesses to the black corrugated tubing.
CAUTION:
Do NOT damage the wires, wire insulation, or tubing when cutting the tie-wrap.
4. Install the new Fuel Level Sending Unit as follows (see Figure 4):
CAUTION: