Titan 2WD V8-5.6L (VK56) (2004)
Submit a Primary Failed Part (PP) line claim using the claims coding table.
TOOL INFORMATION
SERVICE PROCEDURE
CAUTION:
^
Follow all cautions and warnings in the Electronic Service Manual (ESM) when performing this procedure.
^
Wear suitable personal protective equipment (gloves, face shield, etc.) during this procedure.
^
Make sure the ignition switch is OFF before going to step 1, below.
^
Do NOT bend the Float Arm when handling the new Fuel Level Sending Unit.
1.
Remove the Fuel Tank from the vehicle.
^
Refer to section FL of the applicable ESM for the removal instructions.
2.
Remove the Fuel Pump Assembly from the Fuel Tank.
^
Refer to section FL of the applicable ESM for the removal instructions.
3.
Remove the Fuel Level Sending Unit from the Fuel Pump Assembly as follows: