Titan 2WD V8-5.6L (VK56) (2004)
1.
Turn the ignition ON and observe the air bag warning light:
^
Light comes on for 7 seconds and then goes out: OK, go to Inspection Procedure 3.
^
Light stays ON or blinks: NG, go to next step (step 2).
^
Light does not come on at all: The warning light is not working correctly. This condition is not covered by this campaign. Use the Service
Manual and standard warranty procedures to repair the warning light before proceeding.
2.
Connect CONSULT-II to the vehicle and retrieve DTCs
Inspection Procedure 3 (Inspect Wire Harness at Rear Door Hinge)
1.
Open the rear door and locate the harness in the door hinge area.
2.
Inspect the wire harness vinyl tube:
^
Inspect the entire visible area. Look for worn areas, tears, and/or slits.