Titan 2WD V8-5.6L (VK56) (2004)
34.
Disconnect the 5 connectors shown in the figure.
NOTE:
The passenger side will have a 6th connector (not shown).
35.
If the result for Inspection Procedure 1 was NG (seat belt retractor will not extend or retract; remove the 2 seat belt retractor bolts and remove the
seat belt.
^
During reassembly, install a new seat belt.
NOTE:
Seat belt retractor with seat belt pretensioner should be disposed of in accordance with local and state regulations.
36.
Take the harness loose from the door mounting points.
37.
Pull the harness out of the door.
Harness Replacement Part 2 (Includes Seat Belt Replacement, If Needed)