Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
_flex_fuel/Page-920001.png)
Brake Pedal Assy: Adjustments
Standard Pedal
BRAKE PEDAL
Inspection and Adjustment - Standard Pedal
INSPECTION
1. Inspect the brake pedal free height (H) from the floor using Tool at a 90° angle to the floor as shown.
Tool number : - (J-46532)
2. Adjust the brake pedal height to specifications.
ADJUSTMENT
1. Loosen the stop lamp switch and ASCD cancel switch by turning 45° counterclockwise.
2. Loosen lock nut (A) on the input rod, then turn input rod to adjust the brake pedal to specified height. When finished adjusting, tighten lock nut
(A) to specification.