Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
Spark Plug: Service and Repair
Removal and Installation
SPARK PLUG
Removal and Installation
REMOVAL
1. Remove engine room cover using power tool. Refer to See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Cover.
2. Remove ignition coil. Refer to See: Ignition Coil/Service and Repair/Removal and Installation.
3. Remove spark plug using suitable tool.
INSPECTION AFTER REMOVAL
-
Do not use a wire brush for cleaning.
-
If plug tip is covered with carbon, spark plug cleaner may be used.
-
Checking and adjusting plug gap is not required between change intervals.
INSTALLATION
Installation is in the reverse order of removal.