Titan 4WD V8-5.6L (VK56DE) (2006)
Headlamp Bulb: Service and Repair
Bulb Replacement
CAUTION:
-
Turn headlamp switch OFF before disconnecting headlamp harness connector.
-
Do not touch bulb by hand right after being turned off. Burning may result.
-
Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from it.
-
Do not leave bulb out of front combination lamp assembly for a long time because dust, moisture, smoke, etc. may affect the performance of the
lamp. When replacing headlamp bulb, be sure to replace it with a new one.
HEADLAMP (OUTER SIDE), FOR LOW BEAM
Removal
1. Position fender protector aside.
2. Turn headlamp switch OFF.
3. Disconnect headlamp electrical connector.
4. Turn the bulb socket counterclockwise and remove bulb.
Installation
Installation is in the reverse order of removal.
HEADLAMP (INNER SIDE), FOR HIGH BEAM
Removal
1. Turn headlamp switch OFF.
2. Disconnect headlamp electrical connector.
3. Turn the bulb socket counterclockwise and remove bulb.
Installation
Installation is in the reverse order of removal.