Titan 4WD V8-5.6L (VK56DE) (2006)
^
Do not reuse the oil pan gasket.
^
Completely remove all moisture, oil and old gasket from the oil pan gasket mating surfaces and holes.
^
Always replace the oil pan bolts as they are self-sealing.
^
Be sure the oil pan drain plug hole is located to the rear of the transmission assembly.
^
Partially install the oil pan bolts in a criss-cross pattern to prevent dislocation of the gasket.
^
Be careful not to pinch harnesses.
3. Tighten new oil pan bolts in numerical order as shown.
Oil pan bolts: 7.9 Nm (0.81 kg-m, 70 inch lbs.)
4. Install drain plug in oil pan with new gasket.
CAUTION: Do not reuse the drain plug gasket.
Drain plug: 34 Nm (3.5 kg-m, 25 ft. lbs.)
5. Refill the transmission assembly with fluid.