Titan 4WD V8-5.6L (VK56DE) (2006)
4. Remove bolts and detach control device.
INSTALLATION
1. Install new O-ring to transfer control device.
CAUTION:
^
Do not reuse O-ring.
^
Apply petroleum jelly.
2. Install transfer control device.
a. Turn control shift rod fully counterclockwise using flat-bladed screwdriver, and then put mark on control shift rod.
b. Align transfer control device shaft cutout with mark on control shift rod, and install.
NOTE: Turn transfer control device when transfer control device connection does not match.