Titan 4WD V8-5.6L (VK56DE) Flex Fuel (2009)
4. Remove snap ring from A/T assembly harness connector.
5. Push A/T assembly harness connector.
CAUTION:
Do not damage connector.
6. Remove oil pan and oil pan gasket. Refer to See: Fluid Pan/Service and Repair.
7. Disconnect A/T fluid temperature sensor 2 connector (A).
CAUTION:
Do not damage connector.
8. Straighten the four terminal clips to free the terminal cord assembly for A/T fluid temperature sensor 2 harness.
-
Arrow Indicate Terminal clip
9. Straighten terminal clip to free the revolution sensor harness.
10. Disconnect revolution sensor connector.
CAUTION:
Do not damage connector.