Versa L4-1.6L (HR16DE) (2010)
Front Door Window Regulator: Service and Repair
Removal and Installation
FRONT DOOR GLASS AND REGULATOR
Removal and Installation
DOOR GLASS
Removal
1. Remove the front door finisher. See: Front Door Panel/Service and Repair.
2. Disconnect the front door speaker electrical connector.
3. Position the sealing screen aside.
NOTE:
If sealing the screen is reused, cut the butyl-tape so that a part of butyl-tape remains on the sealing screen.
4. Raise or lower the window until the glass bolts can be seen.
-
For power windows, temporarily reconnect the power window switch to operate the window.
-
For manual windows, temporarily reinstall the window crank handle to operate the window.
5. Remove the door glass bolts.