Versa L4-1.6L (HR16DE) (2010)
![background image](/nissan/versa/l4-1.6l_(hr16de)/Page-1154003.png)
10. Slide the outside handle bracket toward the rear of vehicle, remove the outside handle bracket and the door lock assembly.
11. If equipped, disconnect the door lock assembly electrical connector.
12. Disconnect the outside handle cable from the outside handle bracket.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
-
To install each rod, be sure to rotate the rod holder until a click is felt.
-
When installing door lock assembly, be careful when rotating the outside handle cable as shown.
- Place the outside handle bracket cable on the inside of door lock assembly before installing.