Versa L4-1.6L (HR16DE) (2010)
Brake Caliper: Removal and Replacement
FRONT DISC BRAKE
Removal and Installation of Brake Caliper Assembly
REMOVAL
1. Remove front wheel and tire.
2. Secure the disc rotor using wheel nuts.
CAUTION:
Put matching marks on wheel hub assembly and disc rotor, if it is necessary to remove the disc rotor.
3. Drain brake fluid. See: Hydraulic System/Brake Fluid/Service and Repair/Removal and Replacement.
4. Remove the union bolt (A) and discard the copper washers.
Remove the brake hose from the cylinder body.
-
Protrusions (B)
CAUTION:
Do not reuse the copper washers
5. Remove the torque member bolts and remove the cylinder body and torque member as an assembly.
INSTALLATION