Versa L4-1.6L (HR16DE) (2010)
5. Slide the slider (A) toward the casing cap (B) while pressing tabs (C) on the slider to separate the slider (A) from the adjust holder (D). See Figure 1.
6. Remove the casing cap (B; Figure 1) from the cable bracket (D; Figure 2) on the shift selector assembly.
7. Remove the key interlock cable from the key interlock rod (E). See Figure 1.
ADJUSTMENT
1. Place the selector lever in "P" (Park).
2. Turn ignition switch to "ACC" or "ON".
3. Check the key interlock cable for secure fit and proper routing to the key cylinder (no picture shown).
4. Turn ignition switch to "LOCK" position.