Xterra 2WD V6-4.0L (VQ40) (2005)
![background image](/nissan/xterra_2wd/v6-4.0l_(vq40)/Page-727001.png)
Exhaust Manifold: Specifications
Tightening Torques & Sequences
Exhaust Manifold
LEFT BANK
^
If stud bolts were removed, install them and tighten to the specified torque.
Exhaust manifold stud torque ..................................................................................................................................... 14.7 Nm (1.5 kg-m, 11 ft. lbs.)
^
Install exhaust manifold and tighten nuts in numerical order as shown.
NOTE: Tighten nuts No. 1 and 2 in two steps. The numerical order No. 7 and 8 shown second step.
RIGHT BANK
^
If stud bolts were removed, install them and tighten to the specified torque.
Exhaust manifold stud torque ..................................................................................................................................... 14.7 Nm (1.5 kg-m, 11 ft. lbs.)
^
Install exhaust manifold and tighten nuts in numerical order as shown.
NOTE: Tighten nuts No. 1 and 2 in two steps. The numerical order No. 7 and 8 shown second step.