Xterra 2WD V6-4.0L (VQ40) (2005)
Checking Equipment
When ordering the equipment, contact your NISSAN distributor.
CONSULT-II Start Procedure
NOTE: Turning ignition switch off when performing CAN diagnosis could cause CAN memory to be erased.
1. Connect CONSULT-II and CONSULT-II CONVERTER to the data link connector.
2. If necessary, turn on the ignition switch.
3. Touch "START (NISSAN BASED VECL)" or "System Shortcut ENGINE) on the screen.
Consult-II Data Link Connector (DLC) Circuit