Xterra 2WD V6-4.0L (VQ40) (2005)
Starter Motor: Service and Repair
Removal and Installation
REMOVAL
1. Disconnect the negative battery terminal.
2. Remove engine undercover, using power tools.
3. Remove exhaust manifold cover from exhaust manifold (bank 1) to gain access to starter cover bolts. Refer to "REMOVAL".
4. Remove starter cover bolts and starter cover.
5. Disconnect terminal "1" connector and terminal "2" nut.
6. Remove the two starter bolts, using power tools.
7. Remove the starter.
INSTALLATION
Installation is in the reverse order of removal.